YouTube Revenue Calculator: Estimate Earnings from Views
Use this YouTube revenue calculator with a YouTube channel link or a video link. Estimate that single video, or switch to the entire channel. You get a low, mid and high range with the formula shown, or enter your own views and RPM instead.
By Troopus · Updated: October 24, 2026
- 🎬 Single video
- 📈 Low, mid and high range
- 🧮 Formula shown
- 📺 Entire channel
YouTube earnings calculator: estimate your income
Paste a video, Shorts or channel link, a @handle or a channel ID. The tool reads the public view, like and subscriber counts from the YouTube Data API and estimates the ad earnings.
Estimates only. The range below uses 60% of your rate as low and 150% as high, because real RPM changes with audience country, season, video length and ad demand.
How does the YouTube revenue calculator link estimate work?
Paste a video or channel link, choose a single video or the entire channel, and the tool multiplies public views ÷ 1,000 by an RPM. It reads views, subscribers and upload dates through the YouTube Data API. The RPM starts from an illustrative niche and country assumption, and you can overwrite it with your own figure from YouTube Analytics.
Some people call this a YouTube money calculator. The idea is the same: public views and an RPM give a rough range, not a payout.
If you paste a video link you can switch between that video and its whole channel. For a video, the estimate is that video's public views ÷ 1,000 × RPM, shown as lifetime earnings with a low and high range. For a channel, it uses the channel's total views for the lifetime figure and divides them by the channel's age in months (capped at 24) for an average monthly estimate. It also lists the most viewed videos among the latest 50 uploads.
The RPM is a guess: it depends on the video category and the channel country, with a much lower figure for videos of 60 seconds or less, which are probably Shorts. Only the creator can see real earnings in YouTube Analytics, so treat every number as a rough range. Only the link or ID you paste is sent to YouTube to fetch public data, and nothing else is stored by Troopus.
How does a YouTube ad revenue calculator work?
Estimated YouTube ad revenue is views ÷ 1,000 × RPM. RPM is what a creator earns per 1,000 views after YouTube takes its share. At 100,000 views and an RPM of $4, ad revenue is 100 × $4 = $400. A YouTube revenue calculator can only estimate, because RPM varies by video and audience.
This calculator needs three inputs: how many views you get, how often (per day, month or year), and a rate. Ad revenue is then views ÷ 1,000 × rate. If you enter a CPM instead of an RPM, it first converts the CPM into RPM, using the share of views that show an ad and your revenue share.
| Step | Calculation | Result |
|---|---|---|
| Monetized playbacks | 60% of views show an ad | 0.60 |
| Creator share | 55% of ad revenue | 0.55 |
| Effective RPM | $8 × 0.60 × 0.55 | $2.64 |
| Revenue at 100,000 views | 100 × $2.64 | $264 |
The 60% monetized share is an assumption you can edit. It is not an official figure. Sponsorships, memberships and merch are added on top as monthly amounts.
What is the difference between CPM and RPM in a YouTube CPM calculator?
CPM is what advertisers pay per 1,000 ad impressions; RPM is what you earn per 1,000 video views. According to YouTube Help, RPM is calculated after YouTube's revenue share and covers all views, so it is always lower than CPM. Use RPM for estimates, because it is the number in YouTube Analytics.
YouTube Help defines CPM as a measure of how much advertisers spend, before the revenue share. RPM is measured per 1,000 views, not per 1,000 ads, and it is already net of YouTube's share. Two things make RPM lower than CPM: not every view shows an ad, and YouTube keeps part of the revenue.
If you have a channel, open YouTube Studio, go to Analytics, then Revenue, and read your RPM for the last 28 days. Type that number into the RPM field. If you are planning a channel that does not exist yet, use a niche preset as a rough starting point and treat it as a guess.
How much does YouTube pay per 1000 views?
YouTube does not publish a fixed rate, so there is no single answer. Creators report RPMs anywhere from under $1 to well over $10 per 1,000 views, depending on niche, audience country and video length. This calculator lets you enter your own RPM and shows a range from 60% to 150% of it.
Only YouTube Analytics can tell you what your channel earns per 1,000 views. Public RPM figures on blogs and tools are self-reported or modeled, and none are official. The presets in this calculator (gaming 2, entertainment 3, education 4, tech 6, finance 10) are illustrative assumptions chosen to show how the math scales. They are not statistics, and you should overwrite them.
| Monthly views | RPM $2 | RPM $4 | RPM $10 |
|---|---|---|---|
| 10,000 | $20 | $40 | $100 |
| 100,000 | $200 | $400 | $1,000 |
| 1,000,000 | $2,000 | $4,000 | $10,000 |
For quick percentage math on your results, such as what share of income sponsorships make up, use the percentage calculator.
How do niche and country affect earnings?
Niche and country change what advertisers bid, which changes your RPM. Topics with high-value buyers, such as business or software, tend to attract higher bids than entertainment. Viewers in countries with larger ad budgets also tend to generate more per view. Check the country breakdown in YouTube Analytics for your real mix.
Advertisers pay more to reach audiences likely to buy something expensive, so the same 100,000 views can earn very different amounts. Other factors that move RPM include season (ad budgets are usually higher in the fourth quarter), video length, whether mid-roll ads are used, and how many viewers use ad blockers or YouTube Premium.
If most of your audience is in one country, a blended RPM from Analytics is more accurate than any preset. If your audience is global, expect a lower blended figure than a channel with mostly viewers from high-ad-spend countries. This calculator cannot know your audience, so the range output exists to show that uncertainty.
How does a YouTube Shorts revenue calculator differ from long-form?
Shorts earn from a shared pool rather than from ads on each video. According to YouTube Help, Shorts ad revenue goes into a Creator Pool, is allocated by each creator's share of engaged views, and creators keep 45% of their allocated revenue. Per-view earnings are typically much lower than long-form.
On long-form videos, YouTube Help states that partners receive 55% of net revenue from ads on the watch page. For Shorts, ad revenue that appears between videos in the Shorts feed is pooled. Music licensing can reduce the pool, depending on how many tracks the Short uses.
Switch to the Shorts tab above and the revenue share field changes to 45%. The effective RPM you enter is what matters most: a Shorts RPM is usually a fraction of a long-form one, so the example chip uses a deliberately low assumption of $0.05 per 1,000 views. Replace it with the figure from your own Analytics.
What are the YouTube Partner Program requirements?
To earn ad revenue in the YouTube Partner Program you need 1,000 subscribers plus either 4,000 qualified public watch hours in the last 12 months or 10 million qualified public Shorts views in the last 90 days. You also need no active Community Guidelines strikes, 2-Step Verification and an AdSense account.
These requirements come from YouTube Help (page checked October 24, 2026). Other conditions listed there include access to advanced features, a linked and active AdSense account, and living in a country or region where the program is available. Watch hours from Shorts feed views do not count toward the 4,000-hour threshold.
| Route | Subscribers | Other requirement |
|---|---|---|
| Long-form | 1,000 | 4,000 qualified watch hours in the last 12 months |
| Shorts | 1,000 | 10 million qualified Shorts views in the last 90 days |
YouTube has also described an earlier tier with a lower subscriber threshold that unlocks some features such as fan funding, but not ad revenue sharing. Because program terms change, confirm the current numbers in YouTube Studio before you rely on them. Until you are accepted, the calculator results are hypothetical.
Frequently asked questions
How much does YouTube pay per 1,000 views?
There is no fixed rate. Creators see RPMs ranging from under $1 to above $10 per 1,000 views, depending on niche, audience country, season and video length. Check YouTube Analytics for your own RPM and enter it in the calculator.
How do I calculate my YouTube revenue?
Divide your views by 1,000 and multiply by your RPM. For example, 250,000 views at a $3 RPM is 250 × $3 = $750. Add sponsorships, memberships or merch separately. The result is an estimate, not a payout.
How does a YouTube RPM calculator differ from CPM?
RPM is what you earn per 1,000 video views after YouTube's share, including views with no ad. CPM is what advertisers pay per 1,000 ad impressions, before the share. RPM is therefore lower than CPM and is the better estimate basis.
How many views do you need to make money on YouTube?
Views alone do not unlock ad revenue. You need to join the YouTube Partner Program: 1,000 subscribers plus 4,000 public watch hours in 12 months, or 10 million Shorts views in 90 days. After that, earnings grow with views.
How much do YouTube Shorts pay?
It depends on your share of engaged views and on music licensing. YouTube Help says creators keep 45% of their allocated Shorts revenue. Per-view earnings are usually far lower than long-form, so use the Shorts tab with your own RPM.
What are the YouTube Partner Program requirements?
You need 1,000 subscribers plus 4,000 qualified watch hours in the past 12 months, or 10 million qualified Shorts views in 90 days. You also need no active strikes, 2-Step Verification and an AdSense account, per YouTube Help.
How much do YouTubers make?
It varies widely. Income depends on views, RPM, niche and country, plus sponsorships and memberships. For ad revenue alone, divide views by 1,000 and multiply by RPM: 250,000 views at a $3 RPM is $750. Enter your own RPM to see a range.
Can this calculator see my real YouTube earnings?
No. It reads only public data such as views and subscribers through the YouTube Data API, then estimates earnings with an RPM. Real revenue is private to the channel owner and shown in YouTube Analytics, so use your own RPM for a closer figure.